Skip to content
Hengchang Technology

USB-C receptacles

C22 and C16A USB-C receptacles — 29 part numbers from USB 3.0 to USB4

Surface-mount USB-C receptacles for boards that need a specific routing: power-only, USB 3.2 with PD, USB4 over twisted pair, or USB4 over coaxial. Straight, right-angle, side-bend and FFC versions.

  • 29 part numbers across five routing families
  • Straight, 90°, side-bend 90° and vertical SMT
  • Matched to the retimer or redriver already on your board
  • Prototypes in about seven days
C22 series USB-C receptacle range on tape, straight, right-angle and side-bend variants

Choosing

The routing decides the part, not the connector shape

All of these are 16-pin USB-C receptacles and they look alike. What separates them is how the high-speed pair leaves the shell — twisted pair, coaxial, or a sub-board — and that has to match the silicon behind it.

Certification. Manufactured by our partner factory. USB-IF certification is held by the manufacturing partner; TID available on request.

Group 1

USB 3.0 / 3.2 power

Charging ports and data ports that do not need a retimer. The two PD parts carry power delivery without an external controller.

USB 3.0 / 3.2 power part numbers
Part numberRouting / variant
C22-BA134E563.0 A-C
C22-BA144H153.2 no IC
C22-BA144009D9/H3.2 PD, straight
C22-BA144077D9/H3.2 PD, 90°

Group 2

USB4 twisted pair

USB4 and Thunderbolt-class links where the differential pair is routed as twisted pair from the receptacle to the retimer.

USB4 twisted pair part numbers
Part numberRouting / variant
C22-BB146013D9/HU4 twisted pair 332D
C22-BB146024D9/HU4 twisted pair 332D
C22-BB14601573/HU4 twisted pair 91D
C22-BB14601213/HU4 twisted pair 8821F / 8821B
C22-BB14607913/HU4 twisted pair 8821F / 8821B
C22-BB146062D9/HU4 twisted pair, 90°, 332D
C22-BB14607312/A2U4 twisted pair 903W
C22-BB146074D8/A2U4 twisted pair 903U
C22-BB146014K4/L3U4 twisted pair CYPD2103

Group 3

USB4 coaxial

USB4 links routed as coaxial pairs, including sub-board designs where the receptacle sits off the main board.

USB4 coaxial part numbers
Part numberRouting / variant
C22-BB146063A3/K3U4 coaxial 332D
C22-BB146063A3/N6U4 coaxial 8821B
C22-BB146063A3/K4U4 coaxial CYPD2103
C22-BB146063A3/416U4 coaxial 913D
C22-BB146063A3/812U4 coaxial 903W
C22-BB146063A3/9D8U4 coaxial 903U
C22-BB1460615U4 coaxial, sub-board 90°

Group 4

Coaxial optimised

Boards where the coaxial pair is tuned for a specific retimer or redriver — the part number matches the silicon you already use.

Coaxial optimised part numbers
Part numberRouting / variant
C22-BB146026A3/0I6Coaxial optimised 913D
C22-BB146037N6Coaxial optimised 8821B
C22-BB146038K3Coaxial optimised 332D
C22-BB146039K4Coaxial optimised CYPD2103
C22-BB14607012Coaxial optimised 903W
C22-BB146071D8Coaxial optimised 903U

Group 5

FFC and side entry

Thin devices where the cable comes in flat, or where the receptacle has to sit on the edge of the board.

FFC and side entry part numbers
Part numberRouting / variant
C22-BB1460525Side-bend 90° for FFC
C16A-BB146A345Vertical SMT 90° for FFC
C22-BB1460515/0588821 solution for FFC

Customisation

What can change without a new tool

These are routine changes on an existing receptacle family. Anything that alters the pin-out or the board height is a tooling project, not a configuration.

  • Shell height and insertion depth, within the tooling family
  • Contact plating — gold thickness to your requirement
  • Tape-and-reel or tray packing, to your pick-and-place line
  • Reflow-compatible packing and moisture barrier bags
  • Board footprint drawn to your PCB, where a standard pin-out does not fit

Process

Prototype in about seven days, then mass production per configuration

MOQ and production lead time are quoted per configuration: a reel of a catalogue part and a custom board height are different jobs. We would rather quote each one than publish a number that is wrong for half the orders.

1. Retimer and stack-up

Tell us the retimer, board thickness and how the pair is routed.

2. Shortlist

We narrow the catalogue to two or three part numbers.

3. Sample

Prototype in about seven days; tape- and-reel for your line on request.

Related

Around the same connector

The receptacle is one part of a cable assembly — the other end, the cable and the test are what makes it work.

USB-C cable assemblies

240 W E-Marker assemblies and USB4 data cables, tested per assembly.

More pages

XT30 / XT60 / XT90 connectors

High-current DC connectors for battery packs, 20 A to 45 A.

More pages

How OEM orders run

The six-step process from requirement to mass production.

More pages

Buyer questions

Three things buyers ask first

Which part number should I start with for a USB4 design?

Start from the silicon you already have. If your retimer expects twisted-pair routing, pick from the U4 twisted-pair list; if the board is laid out for coaxial pairs, pick from the coaxial list matched to the same retimer family. Send the retimer part number and the board stack-up and we will narrow it to two or three receptacles.

Is the C22 series USB-IF certified?

The USB-IF certification is held by the manufacturing partner, not by us — the TID is available on request. We quote and ship the receptacle, and we will not describe it as our own certification.

Can you supply a receptacle that is not in the catalogue?

Sometimes. Shell height, plating and packing are routine changes. A different pin-out or a new board height needs a tool, which is a separate project with its own lead time — send the drawing and we will say which of the two it is.

Send the retimer and the stack-up

With the retimer part number and the board thickness we can narrow 29 part numbers to two or three. wangyazhong@hengchangtech.com